TY - GEN
T1 - A Switched Beamforming of Fully Shielded Six Parasitic Planar Array for IoT Network
AU - Wina, Priska
AU - Palantei, Elyas
AU - Areni, Intan Sari
AU - Wardi,
AU - Baharuddin, Merna
AU - Dewiani,
AU - Sunarno,
AU - Setijadi, Eko
AU - Hidayat, Arif
N1 - Publisher Copyright:
© 2020 IEEE.
PY - 2020/12/17
Y1 - 2020/12/17
N2 - An optimized switched parasitic smart antenna (SPSA) 915 MHz that consists of 6 monopole parasitic wires encircled a single feeding monopole wire and configured on top of a 328 mm circular ground plane was manufactured and evaluated. SPSA prototype is initially designed to support the practical operation of a particular IoT based surveillance network within the university campus environment. In practical, the constructed antenna installed at a server station will continuously detect the particular active sensor node and maintain the connection and the data transfer between sensor node and the server. A slightly different switched beamforming technique deployed on the fully shielded cover seven monopole wires planar array by electronically setting-up 3 parasitic wires to be grounded and three other floating at the same time in order to point the power beam into a certain direction. Through the sequential variations of those wires set-up then the main lobe directions would be pointed to 6 different directions, i.e. 0°/360°, 60°, 120°, 180°, 240°, and 300°.
AB - An optimized switched parasitic smart antenna (SPSA) 915 MHz that consists of 6 monopole parasitic wires encircled a single feeding monopole wire and configured on top of a 328 mm circular ground plane was manufactured and evaluated. SPSA prototype is initially designed to support the practical operation of a particular IoT based surveillance network within the university campus environment. In practical, the constructed antenna installed at a server station will continuously detect the particular active sensor node and maintain the connection and the data transfer between sensor node and the server. A slightly different switched beamforming technique deployed on the fully shielded cover seven monopole wires planar array by electronically setting-up 3 parasitic wires to be grounded and three other floating at the same time in order to point the power beam into a certain direction. Through the sequential variations of those wires set-up then the main lobe directions would be pointed to 6 different directions, i.e. 0°/360°, 60°, 120°, 180°, 240°, and 300°.
KW - 915-MHz SPSA
KW - Environmental Surveillance
KW - IoT Network
KW - RF-Switching and Planar Array
KW - Switched Beamforming
UR - http://www.scopus.com/inward/record.url?scp=85100474110&partnerID=8YFLogxK
U2 - 10.1109/Comnetsat50391.2020.9329009
DO - 10.1109/Comnetsat50391.2020.9329009
M3 - Conference contribution
AN - SCOPUS:85100474110
T3 - 2020 IEEE International Conference on Communication, Networks and Satellite, Comnetsat 2020 - Proceedings
SP - 240
EP - 245
BT - 2020 IEEE International Conference on Communication, Networks and Satellite, Comnetsat 2020 - Proceedings
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 9th IEEE International Conference on Communication, Networks and Satellite, Comnetsat 2020
Y2 - 17 December 2020 through 18 December 2020
ER -