Converter Design For Self-Power Sensor Of Medical Equipments

Aripriharta; Tiwi Ananda Aprilia; Ayu Purwatiningsih; Muhammad Yazid; Saodah Binti Omar; Gwo Jiun Hong

doi:10.1109/ICEEIE59078.2023.10334645

Converter Design For Self-Power Sensor Of Medical Equipments

Aripriharta^*, Tiwi Ananda Aprilia, Ayu Purwatiningsih, Muhammad Yazid, Saodah Binti Omar, Gwo Jiun Hong

^*Corresponding author for this work

Laboratory of Instrumentation and Biomedical Signals Processing

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The system for collecting wasted energy and converted into electrical energy is called an energy harvesting system. This paper focuses on the application of a boost converter to harvest leg muscle energy using a permanent magnet generator. A permanent magnet generator is a medium to convert the energy wasted from the leg muscles due to leg movements into electrical energy. The voltage result reaches 1.7Vac with a total 100 steps in 3 minutes. The output voltage generated by the permanent magnet generator is low-voltage with AC current. Therefore, there are stages of designing a rectifier and boost converter circuit in the self-power generation system. The output voltage generated from the rectifier and boost converter circuit is 5 Vdc. The 5Vdc output voltage will be supplied to the supercapacitor for storage. The supercapacitor charging takes ± 1 hour 25 minutes to full. The distance required to fully charging the supercapacitor reaches 5,500 steps on an average of 4.18 Km. Electrical energy stored in supercapacitors can be used by electronic devices such as sensors, IoT, and others.

Original language	English
Title of host publication	ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9798350340501
DOIs	https://doi.org/10.1109/ICEEIE59078.2023.10334645
Publication status	Published - 2023
Event	8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023 - Malang City, Indonesia Duration: 28 Sept 2023 → 29 Sept 2023

Publication series

Name	ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering

Conference

Conference	8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023
Country/Territory	Indonesia
City	Malang City
Period	28/09/23 → 29/09/23

Keywords

Boost converter
Leg Muscles
Self Powered
Sensor
Wearable Devices

Access to Document

10.1109/ICEEIE59078.2023.10334645

Cite this

Aripriharta, Aprilia, T. A., Purwatiningsih, A., Yazid, M., Omar, S. B., & Hong, G. J. (2023). Converter Design For Self-Power Sensor Of Medical Equipments. In ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering (ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICEEIE59078.2023.10334645

Aripriharta ; Aprilia, Tiwi Ananda ; Purwatiningsih, Ayu et al. / Converter Design For Self-Power Sensor Of Medical Equipments. ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering. Institute of Electrical and Electronics Engineers Inc., 2023. (ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering).

@inproceedings{01de8352962146408b1568190789e9e7,

title = "Converter Design For Self-Power Sensor Of Medical Equipments",

abstract = "The system for collecting wasted energy and converted into electrical energy is called an energy harvesting system. This paper focuses on the application of a boost converter to harvest leg muscle energy using a permanent magnet generator. A permanent magnet generator is a medium to convert the energy wasted from the leg muscles due to leg movements into electrical energy. The voltage result reaches 1.7Vac with a total 100 steps in 3 minutes. The output voltage generated by the permanent magnet generator is low-voltage with AC current. Therefore, there are stages of designing a rectifier and boost converter circuit in the self-power generation system. The output voltage generated from the rectifier and boost converter circuit is 5 Vdc. The 5Vdc output voltage will be supplied to the supercapacitor for storage. The supercapacitor charging takes ± 1 hour 25 minutes to full. The distance required to fully charging the supercapacitor reaches 5,500 steps on an average of 4.18 Km. Electrical energy stored in supercapacitors can be used by electronic devices such as sensors, IoT, and others.",

keywords = "Boost converter, Leg Muscles, Self Powered, Sensor, Wearable Devices",

author = "Aripriharta and Aprilia, {Tiwi Ananda} and Ayu Purwatiningsih and Muhammad Yazid and Omar, {Saodah Binti} and Hong, {Gwo Jiun}",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023 ; Conference date: 28-09-2023 Through 29-09-2023",

year = "2023",

doi = "10.1109/ICEEIE59078.2023.10334645",

language = "English",

series = "ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering",

address = "United States",

}

Aripriharta, Aprilia, TA, Purwatiningsih, A, Yazid, M, Omar, SB & Hong, GJ 2023, Converter Design For Self-Power Sensor Of Medical Equipments. in ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering. ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering, Institute of Electrical and Electronics Engineers Inc., 8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023, Malang City, Indonesia, 28/09/23. https://doi.org/10.1109/ICEEIE59078.2023.10334645

Converter Design For Self-Power Sensor Of Medical Equipments. / Aripriharta; Aprilia, Tiwi Ananda; Purwatiningsih, Ayu et al.
ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering. Institute of Electrical and Electronics Engineers Inc., 2023. (ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Converter Design For Self-Power Sensor Of Medical Equipments

AU - Aripriharta,

AU - Aprilia, Tiwi Ananda

AU - Purwatiningsih, Ayu

AU - Yazid, Muhammad

AU - Omar, Saodah Binti

AU - Hong, Gwo Jiun

PY - 2023

Y1 - 2023

N2 - The system for collecting wasted energy and converted into electrical energy is called an energy harvesting system. This paper focuses on the application of a boost converter to harvest leg muscle energy using a permanent magnet generator. A permanent magnet generator is a medium to convert the energy wasted from the leg muscles due to leg movements into electrical energy. The voltage result reaches 1.7Vac with a total 100 steps in 3 minutes. The output voltage generated by the permanent magnet generator is low-voltage with AC current. Therefore, there are stages of designing a rectifier and boost converter circuit in the self-power generation system. The output voltage generated from the rectifier and boost converter circuit is 5 Vdc. The 5Vdc output voltage will be supplied to the supercapacitor for storage. The supercapacitor charging takes ± 1 hour 25 minutes to full. The distance required to fully charging the supercapacitor reaches 5,500 steps on an average of 4.18 Km. Electrical energy stored in supercapacitors can be used by electronic devices such as sensors, IoT, and others.

AB - The system for collecting wasted energy and converted into electrical energy is called an energy harvesting system. This paper focuses on the application of a boost converter to harvest leg muscle energy using a permanent magnet generator. A permanent magnet generator is a medium to convert the energy wasted from the leg muscles due to leg movements into electrical energy. The voltage result reaches 1.7Vac with a total 100 steps in 3 minutes. The output voltage generated by the permanent magnet generator is low-voltage with AC current. Therefore, there are stages of designing a rectifier and boost converter circuit in the self-power generation system. The output voltage generated from the rectifier and boost converter circuit is 5 Vdc. The 5Vdc output voltage will be supplied to the supercapacitor for storage. The supercapacitor charging takes ± 1 hour 25 minutes to full. The distance required to fully charging the supercapacitor reaches 5,500 steps on an average of 4.18 Km. Electrical energy stored in supercapacitors can be used by electronic devices such as sensors, IoT, and others.

KW - Boost converter

KW - Leg Muscles

KW - Self Powered

KW - Sensor

KW - Wearable Devices

UR - http://www.scopus.com/inward/record.url?scp=85181148586&partnerID=8YFLogxK

U2 - 10.1109/ICEEIE59078.2023.10334645

DO - 10.1109/ICEEIE59078.2023.10334645

M3 - Conference contribution

AN - SCOPUS:85181148586

T3 - ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering

BT - ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023

Y2 - 28 September 2023 through 29 September 2023

ER -

Aripriharta, Aprilia TA, Purwatiningsih A, Yazid M, Omar SB, Hong GJ. Converter Design For Self-Power Sensor Of Medical Equipments. In ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering. Institute of Electrical and Electronics Engineers Inc. 2023. (ICEEIE 2023 - International Conference on Electrical, Electronics and Information Engineering). doi: 10.1109/ICEEIE59078.2023.10334645

Converter Design For Self-Power Sensor Of Medical Equipments

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this