Design analysis in the application of solar energy for crossing river HDPE boat

Eko Julianto; Agoes Santoso

doi:10.1063/1.5138318

Design analysis in the application of solar energy for crossing river HDPE boat

Eko Julianto
, Agoes Santoso^*

^*Corresponding author for this work

Shipbuilding Institute Polytechnic of Surabaya

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Solar energy become alternative in the provide power for many transportation modes. It is also growing fast in the sea transportation such as ship and boat. The lack of solar power is relatively low power output instead of the free in prices. In the other hand, to get higher power then such as energy sources need bigger plant area. Therefore, one of the solution that will be explore in this study is using lighter boat material such as HDPE to lowering draft and in consequently should lowering hull resistance. Combined latest solar cell technology and lightest HDPE material may present a better design in term of technical and economic aspects. A double impact for green earth campaign by a good combination of renewable energy and environmentally friendly materials. This work uses a 15 meter crossing river boat as case study. The proposed design analyzed to perform as many owner requirements as possible to serve in the certain crossing river area. Also there will be comparative study with the other ship material commonly used such as fiberglass and aluminum.

Original language	English
Title of host publication	Innovative Science and Technology in Mechanical Engineering for Industry 4.0
Subtitle of host publication	Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019
Editors	Vivien Djanali, Fahmi Mubarok, Bambang Pramujati, Suwarno
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735419346
DOIs	https://doi.org/10.1063/1.5138318
Publication status	Published - 10 Dec 2019
Event	4th International Conference on Mechanical Engineering: Innovative Science and Technology in Mechanical Engineering for Industry 4.0, ICOME 2019 - Yogyakarta, Indonesia Duration: 28 Aug 2019 → 29 Aug 2019

Publication series

Name	AIP Conference Proceedings
Volume	2187
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	4th International Conference on Mechanical Engineering: Innovative Science and Technology in Mechanical Engineering for Industry 4.0, ICOME 2019
Country/Territory	Indonesia
City	Yogyakarta
Period	28/08/19 → 29/08/19

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1063/1.5138318

Cite this

Julianto, E., & Santoso, A. (2019). Design analysis in the application of solar energy for crossing river HDPE boat. In V. Djanali, F. Mubarok, B. Pramujati, & Suwarno (Eds.), Innovative Science and Technology in Mechanical Engineering for Industry 4.0: Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019 (AIP Conference Proceedings; Vol. 2187). American Institute of Physics Inc.. https://doi.org/10.1063/1.5138318

Julianto, Eko ; Santoso, Agoes. / Design analysis in the application of solar energy for crossing river HDPE boat. Innovative Science and Technology in Mechanical Engineering for Industry 4.0: Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019. editor / Vivien Djanali ; Fahmi Mubarok ; Bambang Pramujati ; Suwarno. American Institute of Physics Inc., 2019. (AIP Conference Proceedings).

@inproceedings{4ac68de3bad641de83f950940955c296,

title = "Design analysis in the application of solar energy for crossing river HDPE boat",

abstract = "Solar energy become alternative in the provide power for many transportation modes. It is also growing fast in the sea transportation such as ship and boat. The lack of solar power is relatively low power output instead of the free in prices. In the other hand, to get higher power then such as energy sources need bigger plant area. Therefore, one of the solution that will be explore in this study is using lighter boat material such as HDPE to lowering draft and in consequently should lowering hull resistance. Combined latest solar cell technology and lightest HDPE material may present a better design in term of technical and economic aspects. A double impact for green earth campaign by a good combination of renewable energy and environmentally friendly materials. This work uses a 15 meter crossing river boat as case study. The proposed design analyzed to perform as many owner requirements as possible to serve in the certain crossing river area. Also there will be comparative study with the other ship material commonly used such as fiberglass and aluminum.",

author = "Eko Julianto and Agoes Santoso",

note = "Publisher Copyright: {\textcopyright} 2019 Author(s).; 4th International Conference on Mechanical Engineering: Innovative Science and Technology in Mechanical Engineering for Industry 4.0, ICOME 2019 ; Conference date: 28-08-2019 Through 29-08-2019",

year = "2019",

month = dec,

day = "10",

doi = "10.1063/1.5138318",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Vivien Djanali and Fahmi Mubarok and Bambang Pramujati and Suwarno",

booktitle = "Innovative Science and Technology in Mechanical Engineering for Industry 4.0",

}

Julianto, E & Santoso, A 2019, Design analysis in the application of solar energy for crossing river HDPE boat. in V Djanali, F Mubarok, B Pramujati & Suwarno (eds), Innovative Science and Technology in Mechanical Engineering for Industry 4.0: Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019. AIP Conference Proceedings, vol. 2187, American Institute of Physics Inc., 4th International Conference on Mechanical Engineering: Innovative Science and Technology in Mechanical Engineering for Industry 4.0, ICOME 2019, Yogyakarta, Indonesia, 28/08/19. https://doi.org/10.1063/1.5138318

Design analysis in the application of solar energy for crossing river HDPE boat. / Julianto, Eko; Santoso, Agoes.
Innovative Science and Technology in Mechanical Engineering for Industry 4.0: Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019. ed. / Vivien Djanali; Fahmi Mubarok; Bambang Pramujati; Suwarno. American Institute of Physics Inc., 2019. (AIP Conference Proceedings; Vol. 2187).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design analysis in the application of solar energy for crossing river HDPE boat

AU - Julianto, Eko

AU - Santoso, Agoes

PY - 2019/12/10

Y1 - 2019/12/10

N2 - Solar energy become alternative in the provide power for many transportation modes. It is also growing fast in the sea transportation such as ship and boat. The lack of solar power is relatively low power output instead of the free in prices. In the other hand, to get higher power then such as energy sources need bigger plant area. Therefore, one of the solution that will be explore in this study is using lighter boat material such as HDPE to lowering draft and in consequently should lowering hull resistance. Combined latest solar cell technology and lightest HDPE material may present a better design in term of technical and economic aspects. A double impact for green earth campaign by a good combination of renewable energy and environmentally friendly materials. This work uses a 15 meter crossing river boat as case study. The proposed design analyzed to perform as many owner requirements as possible to serve in the certain crossing river area. Also there will be comparative study with the other ship material commonly used such as fiberglass and aluminum.

AB - Solar energy become alternative in the provide power for many transportation modes. It is also growing fast in the sea transportation such as ship and boat. The lack of solar power is relatively low power output instead of the free in prices. In the other hand, to get higher power then such as energy sources need bigger plant area. Therefore, one of the solution that will be explore in this study is using lighter boat material such as HDPE to lowering draft and in consequently should lowering hull resistance. Combined latest solar cell technology and lightest HDPE material may present a better design in term of technical and economic aspects. A double impact for green earth campaign by a good combination of renewable energy and environmentally friendly materials. This work uses a 15 meter crossing river boat as case study. The proposed design analyzed to perform as many owner requirements as possible to serve in the certain crossing river area. Also there will be comparative study with the other ship material commonly used such as fiberglass and aluminum.

UR - https://www.scopus.com/pages/publications/85076777307

U2 - 10.1063/1.5138318

DO - 10.1063/1.5138318

M3 - Conference contribution

AN - SCOPUS:85076777307

T3 - AIP Conference Proceedings

BT - Innovative Science and Technology in Mechanical Engineering for Industry 4.0

A2 - Djanali, Vivien

A2 - Mubarok, Fahmi

A2 - Pramujati, Bambang

A2 - Suwarno, null

PB - American Institute of Physics Inc.

T2 - 4th International Conference on Mechanical Engineering: Innovative Science and Technology in Mechanical Engineering for Industry 4.0, ICOME 2019

Y2 - 28 August 2019 through 29 August 2019

ER -

Julianto E, Santoso A. Design analysis in the application of solar energy for crossing river HDPE boat. In Djanali V, Mubarok F, Pramujati B, Suwarno, editors, Innovative Science and Technology in Mechanical Engineering for Industry 4.0: Proceedings of the 4th International Conference on Mechanical Engineering, ICOME 2019. American Institute of Physics Inc. 2019. (AIP Conference Proceedings). doi: 10.1063/1.5138318

Design analysis in the application of solar energy for crossing river HDPE boat

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this