Dynamic DC optimal power flow using quadratic programming

Rony Seto Wibowo; Nursidi; H. Satriyadi; P. Uman; Adi Soeprijanto; Ontoseno Penangsang

doi:10.1109/ICITEED.2013.6676268

Dynamic DC optimal power flow using quadratic programming

Rony Seto Wibowo, Nursidi, H. Satriyadi, P. Uman, Adi Soeprijanto, Ontoseno Penangsang

Institut Teknologi Sepuluh Nopember

Research output: Contribution to conference › Paper › peer-review

12 Citations (Scopus)

Abstract

This paper proposes a quadratic programming for solving the dynamic direct current optimal power flow (DDCOPF). The DDCOPF solves OPF with multi load levels in which ramp rate of committed units become coupling between two series load levels. To overcome this problem, a very large matrix may be required. The more number of load levels are considered, the larger matrix will be used. Consequently, it may take long computation time to solve. Therefore, the DC load flow is preferable than AC load flow. To show the effectiveness of the proposed approach, IEEE 14 bus test system is used. In addition, application of the proposed approach to real system Jawa Bali 500 kV 25-bus is presented.

Original language	English
Pages	360-364
Number of pages	5
DOIs	https://doi.org/10.1109/ICITEED.2013.6676268
Publication status	Published - 2013
Event	2013 5th International Conference on Information Technology and Electrical Engineering, ICITEE 2013 - Yogyakarta, Indonesia Duration: 7 Oct 2013 → 8 Oct 2013

Conference

Conference	2013 5th International Conference on Information Technology and Electrical Engineering, ICITEE 2013
Country/Territory	Indonesia
City	Yogyakarta
Period	7/10/13 → 8/10/13

Keywords

DC load flow
dynamic optimal power flow
quadratic programming
ramp rate

Access to Document

10.1109/ICITEED.2013.6676268

Cite this

@conference{aef3d54ae6db4376a001a0077da9a29c,

title = "Dynamic DC optimal power flow using quadratic programming",

abstract = "This paper proposes a quadratic programming for solving the dynamic direct current optimal power flow (DDCOPF). The DDCOPF solves OPF with multi load levels in which ramp rate of committed units become coupling between two series load levels. To overcome this problem, a very large matrix may be required. The more number of load levels are considered, the larger matrix will be used. Consequently, it may take long computation time to solve. Therefore, the DC load flow is preferable than AC load flow. To show the effectiveness of the proposed approach, IEEE 14 bus test system is used. In addition, application of the proposed approach to real system Jawa Bali 500 kV 25-bus is presented.",

keywords = "DC load flow, dynamic optimal power flow, quadratic programming, ramp rate",

author = "Wibowo, {Rony Seto} and Nursidi and H. Satriyadi and P. Uman and Adi Soeprijanto and Ontoseno Penangsang",

year = "2013",

doi = "10.1109/ICITEED.2013.6676268",

language = "English",

pages = "360--364",

note = "2013 5th International Conference on Information Technology and Electrical Engineering, ICITEE 2013 ; Conference date: 07-10-2013 Through 08-10-2013",

}

TY - CONF

T1 - Dynamic DC optimal power flow using quadratic programming

AU - Wibowo, Rony Seto

AU - Nursidi,

AU - Satriyadi, H.

AU - Uman, P.

AU - Soeprijanto, Adi

AU - Penangsang, Ontoseno

PY - 2013

Y1 - 2013

N2 - This paper proposes a quadratic programming for solving the dynamic direct current optimal power flow (DDCOPF). The DDCOPF solves OPF with multi load levels in which ramp rate of committed units become coupling between two series load levels. To overcome this problem, a very large matrix may be required. The more number of load levels are considered, the larger matrix will be used. Consequently, it may take long computation time to solve. Therefore, the DC load flow is preferable than AC load flow. To show the effectiveness of the proposed approach, IEEE 14 bus test system is used. In addition, application of the proposed approach to real system Jawa Bali 500 kV 25-bus is presented.

AB - This paper proposes a quadratic programming for solving the dynamic direct current optimal power flow (DDCOPF). The DDCOPF solves OPF with multi load levels in which ramp rate of committed units become coupling between two series load levels. To overcome this problem, a very large matrix may be required. The more number of load levels are considered, the larger matrix will be used. Consequently, it may take long computation time to solve. Therefore, the DC load flow is preferable than AC load flow. To show the effectiveness of the proposed approach, IEEE 14 bus test system is used. In addition, application of the proposed approach to real system Jawa Bali 500 kV 25-bus is presented.

KW - DC load flow

KW - dynamic optimal power flow

KW - quadratic programming

KW - ramp rate

UR - http://www.scopus.com/inward/record.url?scp=84898956588&partnerID=8YFLogxK

U2 - 10.1109/ICITEED.2013.6676268

DO - 10.1109/ICITEED.2013.6676268

M3 - Paper

AN - SCOPUS:84898956588

SP - 360

EP - 364

T2 - 2013 5th International Conference on Information Technology and Electrical Engineering, ICITEE 2013

Y2 - 7 October 2013 through 8 October 2013

ER -

Dynamic DC optimal power flow using quadratic programming

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this