Effect of Delignification Method on the type of Cellulose Water Hyacinth ( Eichornia crassipes) as a Material for Sustainable Sodium-Ion Battery Technology

Biopolymers developed for solid electrolyte materials of sodium-ion batteries are of great interest these days. The main precursor in the form of cellulose biopolymers has been successfully isolated from water hyacinths (Eichornia crassipes). The first stage is maceration using 2% NaOH to produce cellulose-Iα and Ethanol 60% to produce cellulose-Iβ by hydrothermal reaction process at 150 °C and continued at the bleaching stage with H2O2 solution at 50 °C until it changes color. Then the sample is washed to a neutral pH and dried in an oven at 60 °C. Cellulose-Iα yields were obtained with a yield of 33.98% and cellulose-Iβ of 39.11%. The cellulose-I that has been obtained is modified to obtain cellulose-II type by mercerization method, where cellulose-I type is reacted with 20% NaOH for 5 hours. The mixture is then washed to neutral and dried. Cellulose-II yield was obtained with a yield of 69.21%. Samples were characterized by XRD, FTIR, and SEM. The cellulose content of hyacinths before delignification was 36.69%. The cellulose content of hyacinths after delignification for cellulose-Iα and cellulose-Iβ types was 64.26% and 48.58% respectively. FTIR analysis proved the presence of hydroxyl and carboxyl functional groups in hyacinth cellulose. XRD analysis showed that all three samples were identified with cellulose-Iα, cellulose-Iβ, and cellulose-II amorphous structures with a crystallinity index of 28.62% and the largest crystallite size based on the hkl field (121) of cellulose-Iβ type samples was ∼10 nm. SEM analysis shows that cellulose-Iα, cellulose-Iβ has a slim fiber diameter size and straight, smooth surface and microfibrils around the fiber. While cellulose-II shows visualization of a diameter that looks larger and twisted, the surface is rough and there are no microfibrils around the fibers.