Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting

Hosta Ardhyananta; Alvian Toto Wibisono; Mavindra Ramadhani; Muhammad Farid; Muhammad Shena Gumilang

doi:10.1063/1.5030248

Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting

Hosta Ardhyananta^*, Alvian Toto Wibisono, Mavindra Ramadhani, Widyastuti, Muhammad Farid, Muhammad Shena Gumilang

^*Corresponding author for this work

Institut Teknologi Sepuluh Nopember

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

Cu-Zn-Al alloy is one type of brass, which has high strength and high corrosion resistant. It has been applied on ship propellers and marine equipment. In this research, the addition of aluminum (Al) with variation of 1, 2, 3, 4% aluminum to know the effect on mechanical properties and micro structure at casting process using a copper chill and without copper chill. This alloy is melted using furnace in 1100°C without holding. Then, the molten metal is poured into the mold with copper chill and without copper chill. The speciment of Cu-Zn-Al alloy were chracterized by using Optical Emission Spectroscopy (OES), Metallography Test, X-Ray Diffraction (XRD), Hardness Test of Rockwell B and Charpy Impact Test. The result is the addition of aluminum and the use of copper chill on the molds can reduce the grain size, increases the value of hardness and impact.

Original language	English
Title of host publication	Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017
Subtitle of host publication	Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future
Editors	Mas Irfan P. Hidayat
Publisher	American Institute of Physics Inc.
ISBN (Electronic)	9780735416406
DOIs	https://doi.org/10.1063/1.5030248
Publication status	Published - 3 Apr 2018
Event	3rd International Conference on Materials and Metallurgical Engineering and Technology: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future, ICOMMET 2017 - Surabaya, Indonesia Duration: 30 Oct 2017 → 31 Oct 2017

Publication series

Name	AIP Conference Proceedings
Volume	1945
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	3rd International Conference on Materials and Metallurgical Engineering and Technology: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future, ICOMMET 2017
Country/Territory	Indonesia
City	Surabaya
Period	30/10/17 → 31/10/17

Keywords

Copper Chill
Cu-Zn-Al
Mechanical Properties
Microstructures
Sand Casting

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1063/1.5030248

Cite this

Ardhyananta, H., Wibisono, A. T., Ramadhani, M., Widyastuti, Farid, M., & Gumilang, M. S. (2018). Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting. In M. I. P. Hidayat (Ed.), Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future Article 020026 (AIP Conference Proceedings; Vol. 1945). American Institute of Physics Inc.. https://doi.org/10.1063/1.5030248

Ardhyananta, Hosta ; Wibisono, Alvian Toto ; Ramadhani, Mavindra et al. / Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting. Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future. editor / Mas Irfan P. Hidayat. American Institute of Physics Inc., 2018. (AIP Conference Proceedings).

@inproceedings{937b7ff785fa4c8f8dc219d7961dadd4,

title = "Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting",

abstract = "Cu-Zn-Al alloy is one type of brass, which has high strength and high corrosion resistant. It has been applied on ship propellers and marine equipment. In this research, the addition of aluminum (Al) with variation of 1, 2, 3, 4% aluminum to know the effect on mechanical properties and micro structure at casting process using a copper chill and without copper chill. This alloy is melted using furnace in 1100°C without holding. Then, the molten metal is poured into the mold with copper chill and without copper chill. The speciment of Cu-Zn-Al alloy were chracterized by using Optical Emission Spectroscopy (OES), Metallography Test, X-Ray Diffraction (XRD), Hardness Test of Rockwell B and Charpy Impact Test. The result is the addition of aluminum and the use of copper chill on the molds can reduce the grain size, increases the value of hardness and impact.",

keywords = "Copper Chill, Cu-Zn-Al, Mechanical Properties, Microstructures, Sand Casting",

author = "Hosta Ardhyananta and Wibisono, {Alvian Toto} and Mavindra Ramadhani and Widyastuti and Muhammad Farid and Gumilang, {Muhammad Shena}",

note = "Publisher Copyright: {\textcopyright} 2018 Author(s).; 3rd International Conference on Materials and Metallurgical Engineering and Technology: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future, ICOMMET 2017 ; Conference date: 30-10-2017 Through 31-10-2017",

year = "2018",

month = apr,

day = "3",

doi = "10.1063/1.5030248",

language = "English",

series = "AIP Conference Proceedings",

publisher = "American Institute of Physics Inc.",

editor = "Hidayat, {Mas Irfan P.}",

booktitle = "Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017",

}

Ardhyananta, H , Wibisono, AT , Ramadhani, M , Widyastuti, Farid, M & Gumilang, MS 2018, Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting. in MIP Hidayat (ed.), Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future., 020026, AIP Conference Proceedings, vol. 1945, American Institute of Physics Inc., 3rd International Conference on Materials and Metallurgical Engineering and Technology: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future, ICOMMET 2017, Surabaya, Indonesia, 30/10/17. https://doi.org/10.1063/1.5030248

Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting. / Ardhyananta, Hosta ; Wibisono, Alvian Toto ; Ramadhani, Mavindra et al.
Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future. ed. / Mas Irfan P. Hidayat. American Institute of Physics Inc., 2018. 020026 (AIP Conference Proceedings; Vol. 1945).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting

AU - Ardhyananta, Hosta

AU - Wibisono, Alvian Toto

AU - Ramadhani, Mavindra

AU - Widyastuti,

AU - Farid, Muhammad

AU - Gumilang, Muhammad Shena

PY - 2018/4/3

Y1 - 2018/4/3

N2 - Cu-Zn-Al alloy is one type of brass, which has high strength and high corrosion resistant. It has been applied on ship propellers and marine equipment. In this research, the addition of aluminum (Al) with variation of 1, 2, 3, 4% aluminum to know the effect on mechanical properties and micro structure at casting process using a copper chill and without copper chill. This alloy is melted using furnace in 1100°C without holding. Then, the molten metal is poured into the mold with copper chill and without copper chill. The speciment of Cu-Zn-Al alloy were chracterized by using Optical Emission Spectroscopy (OES), Metallography Test, X-Ray Diffraction (XRD), Hardness Test of Rockwell B and Charpy Impact Test. The result is the addition of aluminum and the use of copper chill on the molds can reduce the grain size, increases the value of hardness and impact.

AB - Cu-Zn-Al alloy is one type of brass, which has high strength and high corrosion resistant. It has been applied on ship propellers and marine equipment. In this research, the addition of aluminum (Al) with variation of 1, 2, 3, 4% aluminum to know the effect on mechanical properties and micro structure at casting process using a copper chill and without copper chill. This alloy is melted using furnace in 1100°C without holding. Then, the molten metal is poured into the mold with copper chill and without copper chill. The speciment of Cu-Zn-Al alloy were chracterized by using Optical Emission Spectroscopy (OES), Metallography Test, X-Ray Diffraction (XRD), Hardness Test of Rockwell B and Charpy Impact Test. The result is the addition of aluminum and the use of copper chill on the molds can reduce the grain size, increases the value of hardness and impact.

KW - Copper Chill

KW - Cu-Zn-Al

KW - Mechanical Properties

KW - Microstructures

KW - Sand Casting

UR - http://www.scopus.com/inward/record.url?scp=85045619875&partnerID=8YFLogxK

U2 - 10.1063/1.5030248

DO - 10.1063/1.5030248

M3 - Conference contribution

AN - SCOPUS:85045619875

T3 - AIP Conference Proceedings

BT - Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017

A2 - Hidayat, Mas Irfan P.

PB - American Institute of Physics Inc.

T2 - 3rd International Conference on Materials and Metallurgical Engineering and Technology: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future, ICOMMET 2017

Y2 - 30 October 2017 through 31 October 2017

ER -

Ardhyananta H , Wibisono AT , Ramadhani M , Widyastuti, Farid M, Gumilang MS. Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting. In Hidayat MIP, editor, Proceedings of the 3rd International Conference on Materials and Metallurgical Engineering and Technology, ICOMMET 2017: Advancing Innovation in Materials Science, Technology and Applications for Sustainable Future. American Institute of Physics Inc. 2018. 020026. (AIP Conference Proceedings). doi: 10.1063/1.5030248

Effects of aluminum and copper chill on mechanical properties and microstructures of Cu-Zn-Al alloys with sand casting

Abstract

Publication series

Conference

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this