Effects of Different Coals for Co-Combustion with Palm Oil Waste on Slagging and Fouling Aspects

Implementing a co-combustion technology in coal-fired plants using biomass waste is a promising option to alleviate environmental pollution, reduce fuel costs, and minimize waste. The considerable potential of palm oil waste is believed to be able to substitute coal as a raw material in a coal-fired power plant. However, since each coal has different compositions and biomass generally has a high alkali content, the propensity of slagging and fouling during co-combustion needs to be clarified. This research evaluates the co-combustion ash characteristics of different types of coal, which is co-combusted with 25% palm oil biomass waste. The combustion test employs a drop tube furnace, where the produced ash composition and its morphology are investigated using scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM-EDS) and X-ray diffraction. The results show that the ash melting temperature of the three types of coal mixed with biomass is reduced, although insignificant. Bituminous coal has a low potential for slagging and fouling since SiO₂ and Al₂O₃ dominate the coal ash composition. In addition, lignite coal has low SiO₂ and Al₂O₃ contents but high alkali contents (K and Na). As confirmed by SEM-EDS analysis, probe observations also show that lignite coal co-combustion with empty fruit bunch and frond waste has higher slagging and fouling risks.