Experiment of comparing coldformed steel shear connection using 2 self drilling screw and sikadur 31cf normal adhesive

Sumaidi, P. Suprobo, E. Dan Wahyuni

Research output: Contribution to journalConference articlepeer-review

Abstract

Screw connection is prefered used by apllicator because of it's simple. Type of screw usually used is Self Drilling Screw (SDS). This type of screw will become fix as it's screwed by the applicator until its head . almost all applicator able to make this connection and do not need some course or sertificate to become an applicator, does not like applicator of High Tension Bolt, HTB. But this type of connection has some disadvantages, for example it's connection doest not suit to dynamic loading. the experiment results that galvalume material has Yeilding Force, fy = 580 Mpa and Ultimate Force, fu = 590 Mpa. Connection of 2 SDS screw vertically configured fail on about tension loading 6000 N less than horizontally configured that fail on about 7500 N. Displacement of 2 SDS screw vertically configure on about 0.6 mm less than horizontally one that fail on displacement 0.85 mm. For adhesive of Sikadur CF 31 connection fail on loading about 6000 N tension loading but its displacement is less than 0.5 mm when it fail, for 2 type of connection configured.

Original languageEnglish
Article number012228
JournalJournal of Physics: Conference Series
Volume953
Issue number1
DOIs
Publication statusPublished - 6 Feb 2018
Event2nd International Joint Conference on Science and Technology, IJCST 2017 - Bali, Indonesia
Duration: 27 Sept 201728 Sept 2017

Fingerprint

Dive into the research topics of 'Experiment of comparing coldformed steel shear connection using 2 self drilling screw and sikadur 31cf normal adhesive'. Together they form a unique fingerprint.

Cite this