Experimental analysis of the recovery and chemical properties of pyrolytic oil derived from medical waste with varying components combined via a systematic combination approach

Pyrolysis of medical waste components combined via a novel systematic combination approach (sequentially binary, ternary, and quaternary copyrolysis) was conducted at 400°C to investigate the synergy between medical waste components in improving chemical characteristics and yields of pyrolytic oil. Pyrolysis of hydrocarbon-polymer-containing materials such as medical gloves and rubber bands produced more than 30% of liquid products with substantial compositions of saturated aliphatic hydrocarbon polymers. On the other hand, moisture- and carbonyl-rich pyrolytic liquid products with low selectivity were obtained from pyrolysis of lignocellulosic biomass waste such as HVS paper (houtvrij schrijfpapier, meaning “writing paper made from wood pulp”) and garden waste. Binary copyrolysis of lignocellulosic biomass and medical gloves exhibited improvement on pyrolytic liquid yield and selectivity toward saturated aliphatic hydrocarbon polymers due to hydrogen donor as the medical glove fraction became dominant. The addition of rubber band to the mixture of HVS paper and medical face masks enhanced the pyrolytic liquid yield. The pyrolysis of the mixture of HVS paper, medical face masks, medical gloves, and either rubber bands or cotton fabrics with mixture ratio of 60:20:10:10 yielded the most optimum pyrolytic liquid yield with significant distribution of alkanes in the pyrolytic liquid products.