@inproceedings{565813d3298342f1870f8a40633dcb31,
title = "Experimental study on the effect of heating temperature on bioethanol injector to spray characteristics for application on sinjai-150 engine",
abstract = "Bioethanol is an alternative fuel for internal combustion engine which produces lower emission and higher octane number. One of bioethanol problem is the high latent heat of vaporization can induce running difficulties in cold conditions, especially cold start. To overcome this problem then bioethanol is heated on the nozzle tip. The heated injector is tested using an injector tester. The injector output temperature is maintained at temperature 50, 60 and 70°C with varying pressure and pulse width. The fuel used in this research is bioethanol E100 with a purity of 99.96%. Injector characteristics obtained from documentation using high-speed camera. The result of this research is by heating the fuel can cause the density of bioethanol to expand so that the mass flowing injector less. With the heater on the injector causes the spray characteristics become more refined which means the atomization of fuel with air to be better.",
author = "Ramadhani, {Ayu S.} and Bambang Sudarmanta",
note = "Publisher Copyright: {\textcopyright} 2018 Author(s).; 3rd International Conference on Mechanical Engineering, ICOME 2017 ; Conference date: 05-10-2017 Through 06-10-2017",
year = "2018",
month = jul,
day = "13",
doi = "10.1063/1.5046225",
language = "English",
series = "AIP Conference Proceedings",
publisher = "American Institute of Physics Inc.",
editor = "Djanali, {Vivien S.} and Suwarno and Bambang Pramujati and Yartys, {Volodymyr A.}",
booktitle = "Disruptive Innovation in Mechanical Engineering for Industry Competitiveness",
}