Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure

Dony Setyawan; Aries Sulisetyono; Wasis Dwi Aryawan; Rizky Chandra Ariesta

doi:10.1109/OETIC57156.2022.10176242

Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure

Dony Setyawan^*
, Aries Sulisetyono
, Wasis Dwi Aryawan
, Rizky Chandra Ariesta

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

Abstract

The use of materials for small vessels in Indonesia is mostly made from FRP. In 2000 the use of Fiber Reinforced Plastic (FRP) was banned, a non-biodegradable material that can cause environmental problems. According to the problem of broadly small shipbuilding, search for materials of the same strength. In this paper, the hull is designed using High-Density Polyethylene (HDPE) material analysis focused on the midship structure using the Finite Element Analysis (FEA) method. It is necessary to test the initial material as data verification on the material properties as input analysis for the evaluation test. The analysis of this study aims to show the strength of the HDPE boat structure used for small boat materials.

Original language	English
Title of host publication	Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference
Subtitle of host publication	Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	93-98
Number of pages	6
ISBN (Electronic)	9798350397079
DOIs	https://doi.org/10.1109/OETIC57156.2022.10176242
Publication status	Published - 2022
Event	2022 IEEE Ocean Engineering Technology and Innovation Conference, OETIC 2022 - Jakarta, Indonesia Duration: 19 Dec 2022 → 20 Dec 2022

Publication series

Name	Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022

Conference

Conference	2022 IEEE Ocean Engineering Technology and Innovation Conference, OETIC 2022
Country/Territory	Indonesia
City	Jakarta
Period	19/12/22 → 20/12/22

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

FRP
HDPE
Material
Small boat
Structure

Access to Document

10.1109/OETIC57156.2022.10176242

Cite this

Setyawan, D., Sulisetyono, A., Aryawan, W. D., & Ariesta, R. C. (2022). Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure. In Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022 (pp. 93-98). (Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/OETIC57156.2022.10176242

Setyawan, Dony ; Sulisetyono, Aries ; Aryawan, Wasis Dwi et al. / Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure. Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022. Institute of Electrical and Electronics Engineers Inc., 2022. pp. 93-98 (Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022).

@inproceedings{891abf14fe8140678fbfad854883a530,

title = "Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure",

abstract = "The use of materials for small vessels in Indonesia is mostly made from FRP. In 2000 the use of Fiber Reinforced Plastic (FRP) was banned, a non-biodegradable material that can cause environmental problems. According to the problem of broadly small shipbuilding, search for materials of the same strength. In this paper, the hull is designed using High-Density Polyethylene (HDPE) material analysis focused on the midship structure using the Finite Element Analysis (FEA) method. It is necessary to test the initial material as data verification on the material properties as input analysis for the evaluation test. The analysis of this study aims to show the strength of the HDPE boat structure used for small boat materials.",

keywords = "FRP, HDPE, Material, Small boat, Structure",

author = "Dony Setyawan and Aries Sulisetyono and Aryawan, \{Wasis Dwi\} and Ariesta, \{Rizky Chandra\}",

note = "Publisher Copyright: {\textcopyright} 2022 IEEE.; 2022 IEEE Ocean Engineering Technology and Innovation Conference, OETIC 2022 ; Conference date: 19-12-2022 Through 20-12-2022",

year = "2022",

doi = "10.1109/OETIC57156.2022.10176242",

language = "English",

series = "Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "93--98",

booktitle = "Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference",

address = "United States",

}

Setyawan, D , Sulisetyono, A , Aryawan, WD & Ariesta, RC 2022, Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure. in Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022. Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022, Institute of Electrical and Electronics Engineers Inc., pp. 93-98, 2022 IEEE Ocean Engineering Technology and Innovation Conference, OETIC 2022, Jakarta, Indonesia, 19/12/22. https://doi.org/10.1109/OETIC57156.2022.10176242

Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure. / Setyawan, Dony ; Sulisetyono, Aries ; Aryawan, Wasis Dwi et al.
Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022. Institute of Electrical and Electronics Engineers Inc., 2022. p. 93-98 (Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure

AU - Setyawan, Dony

AU - Sulisetyono, Aries

AU - Aryawan, Wasis Dwi

AU - Ariesta, Rizky Chandra

PY - 2022

Y1 - 2022

N2 - The use of materials for small vessels in Indonesia is mostly made from FRP. In 2000 the use of Fiber Reinforced Plastic (FRP) was banned, a non-biodegradable material that can cause environmental problems. According to the problem of broadly small shipbuilding, search for materials of the same strength. In this paper, the hull is designed using High-Density Polyethylene (HDPE) material analysis focused on the midship structure using the Finite Element Analysis (FEA) method. It is necessary to test the initial material as data verification on the material properties as input analysis for the evaluation test. The analysis of this study aims to show the strength of the HDPE boat structure used for small boat materials.

AB - The use of materials for small vessels in Indonesia is mostly made from FRP. In 2000 the use of Fiber Reinforced Plastic (FRP) was banned, a non-biodegradable material that can cause environmental problems. According to the problem of broadly small shipbuilding, search for materials of the same strength. In this paper, the hull is designed using High-Density Polyethylene (HDPE) material analysis focused on the midship structure using the Finite Element Analysis (FEA) method. It is necessary to test the initial material as data verification on the material properties as input analysis for the evaluation test. The analysis of this study aims to show the strength of the HDPE boat structure used for small boat materials.

KW - FRP

KW - HDPE

KW - Material

KW - Small boat

KW - Structure

UR - https://www.scopus.com/pages/publications/85166677492

U2 - 10.1109/OETIC57156.2022.10176242

DO - 10.1109/OETIC57156.2022.10176242

M3 - Conference contribution

AN - SCOPUS:85166677492

T3 - Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022

SP - 93

EP - 98

BT - Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2022 IEEE Ocean Engineering Technology and Innovation Conference, OETIC 2022

Y2 - 19 December 2022 through 20 December 2022

ER -

Setyawan D , Sulisetyono A , Aryawan WD , Ariesta RC. Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure. In Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022. Institute of Electrical and Electronics Engineers Inc. 2022. p. 93-98. (Proceeding - 2022 IEEE Ocean Engineering Technology and Innovation Conference: Management and Conservation for Sustainable and Resilient Marine and Coastal Resources, OETIC 2022). doi: 10.1109/OETIC57156.2022.10176242

Finite Element Analysis for Structural Strength of High-Density Polyethylene Material on Midship Boat Structure

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this