Lamellar orientation and interlamellar cracks in co-crystallized poly(ethylene oxide)/poly(L-lactic acid) blend

Ya Ting Hsieh, Siti Nurkhamidah, Eamor M. Woo*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

17 Citations (Scopus)


The correlation between the lamellar orientation in ring-banded spherulites and crack patterns in blends of two crystalline polymers crystallized in two steps was investigated. The two polymers were poly(ethylene oxide) (PEO) and poly(L-lactic acid) (PLLA) with a low molecular weight. The techniques used for this investigation included polarizing light optical microscopy, scanning electron microscopy and atomic force microscopy. Crack formation was influenced by the ring band patterns in PLLA and overlapping or impingement between PEO spherulites upon cooling. By extracting the water-soluble PEO from the PEO/PLLA blend, the inner morphology of the lamellar textures was further revealed to have a complex pattern. It consisted of the outer macro-lamellae with a flat-on width of 20 m and twisting micro-lamellae with a 1-2 μm edge-on width. As the excess PEO was etched off from the valley and the interlamellar crevices of the PLLA lamellae, the outer macro-lamellae plates (∼20 μm flat-on width) exhibited up and down periodicity with flat-on orientation. However, the micro-lamellae (with 1-2 μm edge-on width) with twisting were visible inside the cracks. Similar analysis of a PEO-rich composition, PEO/PLLA (80/20) blend with irregular ring bands and no cracks, revealed that the outer macro-lamellae were not present. However, all micro-lamellae twists in the ridge regions irregularly protrude out to create zig-zag banding.

Original languageEnglish
Pages (from-to)762-769
Number of pages8
JournalPolymer Journal
Issue number9
Publication statusPublished - Sept 2011
Externally publishedYes


  • PEO
  • PLLA
  • cracks
  • lamellae orientation
  • spherulites


Dive into the research topics of 'Lamellar orientation and interlamellar cracks in co-crystallized poly(ethylene oxide)/poly(L-lactic acid) blend'. Together they form a unique fingerprint.

Cite this