Abstract

Low current ripple in the boost converter is crucial in renewable energy system design due to its potential impacts on the operation of other devices. One device that can be directly affected is the MPPT controller. To address this issue, a modified boost converter has been introduced to yield a lower current ripple compared to that of the standard boost converter. This paper presents a study conducted on the modified boost converter when connected to a PV array and a switch controlled by MPPT utilizing Perturb Observe (PO) and Particle Swarm Optimization (PSO) algorithms. The simulation results show that the PSO algorithm is more reliable than the PO algorithm under various irradiation conditions. PSO can minimize steady-state oscillation and the capability to track maximum power than PO.

Original languageEnglish
Title of host publication2021 1st International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2021
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages102-107
Number of pages6
ISBN (Electronic)9781665405461
DOIs
Publication statusPublished - 2021
Event1st International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2021 - Virtual, Online, Indonesia
Duration: 15 Oct 202116 Oct 2021

Publication series

Name2021 1st International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2021

Conference

Conference1st International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2021
Country/TerritoryIndonesia
CityVirtual, Online
Period15/10/2116/10/21

Keywords

  • MPPT
  • PO
  • PSO
  • PV array
  • modified boost converter

Fingerprint

Dive into the research topics of 'Low Current Ripple Control Using Particle Swarm Algorithm Based Modified Boost Converter for MPPT Application'. Together they form a unique fingerprint.

Cite this