Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication

Putu Artawanartawan; Josaphat T. Sri Sumantyo; Yono Hadi Pramono

doi:10.5373/JARDCS/V12SP3/20201363

Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication

Putu Artawanartawan, Josaphat T. Sri Sumantyo, Mashuri, Yono Hadi Pramono

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

FR-4 and NPC-220AH substrates are used to design antennas with Multiband frequency. This research, therefore, aims to design varying performance Curved Microstripline Array Antenna, with optimized parameters. This was carried out with the difference substrate in the simulation program. In addition, the proposed antenna is analyzed to determine the return loss (S₁₁ parameter), Voltage Standing Wave Ratio (VSWR), Gain, and Radiation Pattern. The result showed that the microstrip antenna design uses the dielectric substrate materials of varying constant values. In conclusion, this study suggests the use of cost-effective substrate materials.

Original language	English
Pages (from-to)	1166-1172
Number of pages	7
Journal	Journal of Advanced Research in Dynamical and Control Systems
Volume	12
Issue number	3 Special Issue
DOIs	https://doi.org/10.5373/JARDCS/V12SP3/20201363
Publication status	Published - 2020

Keywords

Antenna
Communication
FR-4
NPC-220AH
Sattelite

Access to Document

10.5373/JARDCS/V12SP3/20201363

Cite this

@article{7ca18255e3c145449d8be9eac8410536,

title = "Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication",

abstract = "FR-4 and NPC-220AH substrates are used to design antennas with Multiband frequency. This research, therefore, aims to design varying performance Curved Microstripline Array Antenna, with optimized parameters. This was carried out with the difference substrate in the simulation program. In addition, the proposed antenna is analyzed to determine the return loss (S11 parameter), Voltage Standing Wave Ratio (VSWR), Gain, and Radiation Pattern. The result showed that the microstrip antenna design uses the dielectric substrate materials of varying constant values. In conclusion, this study suggests the use of cost-effective substrate materials.",

keywords = "Antenna, Communication, FR-4, NPC-220AH, Sattelite",

author = "Putu Artawanartawan and {Sri Sumantyo}, {Josaphat T.} and Mashuri and Pramono, {Yono Hadi}",

year = "2020",

doi = "10.5373/JARDCS/V12SP3/20201363",

language = "English",

volume = "12",

pages = "1166--1172",

journal = "Journal of Advanced Research in Dynamical and Control Systems",

issn = "1943-023X",

publisher = "Institute of Advanced Scientific Research",

number = "3 Special Issue",

}

Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication. / Artawanartawan, Putu; Sri Sumantyo, Josaphat T.; Mashuri et al.
In: Journal of Advanced Research in Dynamical and Control Systems, Vol. 12, No. 3 Special Issue, 2020, p. 1166-1172.

Research output: Contribution to journal › Article › peer-review

TY - JOUR

T1 - Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication

AU - Artawanartawan, Putu

AU - Sri Sumantyo, Josaphat T.

AU - Mashuri,

AU - Pramono, Yono Hadi

PY - 2020

Y1 - 2020

N2 - FR-4 and NPC-220AH substrates are used to design antennas with Multiband frequency. This research, therefore, aims to design varying performance Curved Microstripline Array Antenna, with optimized parameters. This was carried out with the difference substrate in the simulation program. In addition, the proposed antenna is analyzed to determine the return loss (S11 parameter), Voltage Standing Wave Ratio (VSWR), Gain, and Radiation Pattern. The result showed that the microstrip antenna design uses the dielectric substrate materials of varying constant values. In conclusion, this study suggests the use of cost-effective substrate materials.

AB - FR-4 and NPC-220AH substrates are used to design antennas with Multiband frequency. This research, therefore, aims to design varying performance Curved Microstripline Array Antenna, with optimized parameters. This was carried out with the difference substrate in the simulation program. In addition, the proposed antenna is analyzed to determine the return loss (S11 parameter), Voltage Standing Wave Ratio (VSWR), Gain, and Radiation Pattern. The result showed that the microstrip antenna design uses the dielectric substrate materials of varying constant values. In conclusion, this study suggests the use of cost-effective substrate materials.

KW - Antenna

KW - Communication

KW - FR-4

KW - NPC-220AH

KW - Sattelite

UR - http://www.scopus.com/inward/record.url?scp=85083006224&partnerID=8YFLogxK

U2 - 10.5373/JARDCS/V12SP3/20201363

DO - 10.5373/JARDCS/V12SP3/20201363

M3 - Article

AN - SCOPUS:85083006224

SN - 1943-023X

VL - 12

SP - 1166

EP - 1172

JO - Journal of Advanced Research in Dynamical and Control Systems

JF - Journal of Advanced Research in Dynamical and Control Systems

IS - 3 Special Issue

ER -

Performance analysis of FR-4 and NPC-220AH substrate in curved microstripline 2x2 array antenna for satellite communication

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this