TY - GEN
T1 - Prototype Design of Automatic Light Intensity Control in Smart Green House
AU - Patrialova, Sefi Novendra
AU - Agasta, Tedy
AU - Sari, Idha Nurmalita
N1 - Publisher Copyright:
© 2021 IEEE.
PY - 2021
Y1 - 2021
N2 - Lack of sunlight will interfere with the process of photosynthesis and the growth of plants. The amount of needs on each plant depends on the needs of plants. Lack of light will cause symptoms of ethiolasi, i.e. the stem will grow smaller and pale (not green). Therefore, Roof Retractable System is the solution to the problem. The system is equipped with Grow LED that can provide light intensity differ according to the type of plant, for example, Pakcoy needs light 12000 lux, and Lettuce requires light 4305 lux. The result of the Variation of Grow LED is produced by utilizing dimmer rotation controlled by Arduino Mega, Light Intensity Requirement (BH1750) which is then able to be monitored through the Website. Retractable Roof works automatically based on seed and Planting Modes so that it can be seen the response of light intensity values that adjust to the Servo Motor and Growing LED. Test results from Morning to Afternoon Light Intensity following Table 4.5. Where if the Lux value is less than setpoint which is 5000, then Dimmer will create an angle that has been summed up with the existing Lux value in that hour, and then if Lux <.=100 then dimmer will show angle 225 or maximum.
AB - Lack of sunlight will interfere with the process of photosynthesis and the growth of plants. The amount of needs on each plant depends on the needs of plants. Lack of light will cause symptoms of ethiolasi, i.e. the stem will grow smaller and pale (not green). Therefore, Roof Retractable System is the solution to the problem. The system is equipped with Grow LED that can provide light intensity differ according to the type of plant, for example, Pakcoy needs light 12000 lux, and Lettuce requires light 4305 lux. The result of the Variation of Grow LED is produced by utilizing dimmer rotation controlled by Arduino Mega, Light Intensity Requirement (BH1750) which is then able to be monitored through the Website. Retractable Roof works automatically based on seed and Planting Modes so that it can be seen the response of light intensity values that adjust to the Servo Motor and Growing LED. Test results from Morning to Afternoon Light Intensity following Table 4.5. Where if the Lux value is less than setpoint which is 5000, then Dimmer will create an angle that has been summed up with the existing Lux value in that hour, and then if Lux <.=100 then dimmer will show angle 225 or maximum.
KW - BH1750
KW - Dimmer
KW - Growing LED
KW - Servo Motor
KW - Smart Greenhouse
UR - http://www.scopus.com/inward/record.url?scp=85135098718&partnerID=8YFLogxK
U2 - 10.1109/ICAMIMIA54022.2021.9807698
DO - 10.1109/ICAMIMIA54022.2021.9807698
M3 - Conference contribution
AN - SCOPUS:85135098718
T3 - 2021 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation, ICAMIMIA 2021 - Proceeding
SP - 41
EP - 46
BT - 2021 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation, ICAMIMIA 2021 - Proceeding
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2021 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation, ICAMIMIA 2021
Y2 - 8 December 2021 through 9 December 2021
ER -