Study of microcellular foaming of polystyrene aided with 45 kHz of ultrasound waves energy

In the microcellular foam plastic processing, cellular formation stage was being an essential stage since the nucleation and growth of the cell take place within. Based on classical nucleation theory, diminution of the free energy for nucleation, exponentially lead to an increase in the nucleation rate. This can be done by increasing the super-saturation level which achieved by heating the gas-saturated polymer. Hence, the advance is taken out by utilizing the ultrasound wave simultaneously with heating for foaming Polystyrene-scCO₂, which, not only to keep the super-saturation degree but also reduce the nucleation barrier. In this work, foaming was conducted under 45 kHz of ultrasound and varying the foaming temperature after saturating polystyrene with scCO₂. The results demonstrate, that foaming under ultrasound, the expansion ratio attained up to 1.5 fold, increase along with the heating temperature. Higher cell densities obtained with ultrasound applied at 50°C, however only slight difference can be seen, which about 10¹⁰–10¹¹ cell/cm³. From the cell size distribution results, cell distributed around 0.5–3.5 µm, with or without ultrasound applied for 60 and 70°C, Meanwhile at 50°C of foaming, the lowest cell size obtained with the aid of ultrasound in the range of 0.3–2.4 µm.