Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method

Lailatul Qadariyah; Mahfud Mahfud; Raka Selaksa Charisma Muchammad; Budi Rizky Junianto; Daniel Wiradanu Prasetya; Donny Satria Bhuana

Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method

Lailatul Qadariyah^*, Mahfud Mahfud, Raka Selaksa Charisma Muchammad, Budi Rizky Junianto, Daniel Wiradanu Prasetya, Donny Satria Bhuana

^*Corresponding author for this work

Institut Teknologi Sepuluh Nopember

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Ocimum basilicum essential oil has many uses; however, it is still difficult to get the maximum results, in terms of both quantity and quality due to some reason. Thus, it is necessary to study the factors affecting the extraction in order to give the maximum output in terms of yield and quality. The method in this study was the most commonly used one, which is called hydrodistillation (HD) method. The highest yield in this study goes as high as 1.4%, which was obtained when 1 cm-sized of material, 2100 Watt of power, and solvent to material ratio of 0.025 was operated. With regards to the resulting composition and chemical analysis results, it shows the best condition for extraction using HD method is at 2100 W power, the F/S ratio is 0.025, and the material size is 1 cm.

Original language	English
Title of host publication	Symposium of Materials Science and Chemistry II
Editors	Tutik Dwi Wahyuningsih, Roto Roto, Dwi Siswanta, Rohana Adnan, Laurent Commeiras, Kuwat Triyana, Kuwat Triyana, Indriana Kartini, Julius Motuzas
Publisher	Trans Tech Publications Ltd
Pages	199-204
Number of pages	6
ISBN (Print)	9783035716139
Publication status	Published - 2020
Event	5th International Conference on Science and Technology, ICST 2019 - Yogyakarta, Indonesia Duration: 30 Jul 2019 → 31 Jul 2019

Publication series

Name	Key Engineering Materials
Volume	840 KEM
ISSN (Print)	1013-9826
ISSN (Electronic)	1662-9795

Conference

Conference	5th International Conference on Science and Technology, ICST 2019
Country/Territory	Indonesia
City	Yogyakarta
Period	30/07/19 → 31/07/19

Keywords

Extraction yield
Hydrodisltillation
Ocimum basilicum

Cite this

Qadariyah, L., Mahfud, M., Muchammad, R. S. C., Junianto, B. R., Prasetya, D. W., & Bhuana, D. S. (2020). Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method. In T. D. Wahyuningsih, R. Roto, D. Siswanta, R. Adnan, L. Commeiras, K. Triyana, K. Triyana, I. Kartini, & J. Motuzas (Eds.), Symposium of Materials Science and Chemistry II (pp. 199-204). (Key Engineering Materials; Vol. 840 KEM). Trans Tech Publications Ltd.

Qadariyah, Lailatul ; Mahfud, Mahfud ; Muchammad, Raka Selaksa Charisma et al. / Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method. Symposium of Materials Science and Chemistry II. editor / Tutik Dwi Wahyuningsih ; Roto Roto ; Dwi Siswanta ; Rohana Adnan ; Laurent Commeiras ; Kuwat Triyana ; Kuwat Triyana ; Indriana Kartini ; Julius Motuzas. Trans Tech Publications Ltd, 2020. pp. 199-204 (Key Engineering Materials).

@inproceedings{2f551bb946614fc684a6ac5b1c49bc1d,

title = "Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method",

abstract = "Ocimum basilicum essential oil has many uses; however, it is still difficult to get the maximum results, in terms of both quantity and quality due to some reason. Thus, it is necessary to study the factors affecting the extraction in order to give the maximum output in terms of yield and quality. The method in this study was the most commonly used one, which is called hydrodistillation (HD) method. The highest yield in this study goes as high as 1.4%, which was obtained when 1 cm-sized of material, 2100 Watt of power, and solvent to material ratio of 0.025 was operated. With regards to the resulting composition and chemical analysis results, it shows the best condition for extraction using HD method is at 2100 W power, the F/S ratio is 0.025, and the material size is 1 cm.",

keywords = "Extraction yield, Hydrodisltillation, Ocimum basilicum",

author = "Lailatul Qadariyah and Mahfud Mahfud and Muchammad, {Raka Selaksa Charisma} and Junianto, {Budi Rizky} and Prasetya, {Daniel Wiradanu} and Bhuana, {Donny Satria}",

note = "Publisher Copyright: {\textcopyright} 2020 Trans Tech Publications Ltd, Switzerland.; 5th International Conference on Science and Technology, ICST 2019 ; Conference date: 30-07-2019 Through 31-07-2019",

year = "2020",

language = "English",

isbn = "9783035716139",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications Ltd",

pages = "199--204",

editor = "Wahyuningsih, {Tutik Dwi} and Roto Roto and Dwi Siswanta and Rohana Adnan and Laurent Commeiras and Kuwat Triyana and Kuwat Triyana and Indriana Kartini and Julius Motuzas",

booktitle = "Symposium of Materials Science and Chemistry II",

}

Qadariyah, L , Mahfud, M, Muchammad, RSC, Junianto, BR, Prasetya, DW & Bhuana, DS 2020, Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method. in TD Wahyuningsih, R Roto, D Siswanta, R Adnan, L Commeiras, K Triyana, K Triyana, I Kartini & J Motuzas (eds), Symposium of Materials Science and Chemistry II. Key Engineering Materials, vol. 840 KEM, Trans Tech Publications Ltd, pp. 199-204, 5th International Conference on Science and Technology, ICST 2019, Yogyakarta, Indonesia, 30/07/19.

Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method. / Qadariyah, Lailatul ; Mahfud, Mahfud; Muchammad, Raka Selaksa Charisma et al.
Symposium of Materials Science and Chemistry II. ed. / Tutik Dwi Wahyuningsih; Roto Roto; Dwi Siswanta; Rohana Adnan; Laurent Commeiras; Kuwat Triyana; Kuwat Triyana; Indriana Kartini; Julius Motuzas. Trans Tech Publications Ltd, 2020. p. 199-204 (Key Engineering Materials; Vol. 840 KEM).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method

AU - Qadariyah, Lailatul

AU - Mahfud, Mahfud

AU - Muchammad, Raka Selaksa Charisma

AU - Junianto, Budi Rizky

AU - Prasetya, Daniel Wiradanu

AU - Bhuana, Donny Satria

PY - 2020

Y1 - 2020

N2 - Ocimum basilicum essential oil has many uses; however, it is still difficult to get the maximum results, in terms of both quantity and quality due to some reason. Thus, it is necessary to study the factors affecting the extraction in order to give the maximum output in terms of yield and quality. The method in this study was the most commonly used one, which is called hydrodistillation (HD) method. The highest yield in this study goes as high as 1.4%, which was obtained when 1 cm-sized of material, 2100 Watt of power, and solvent to material ratio of 0.025 was operated. With regards to the resulting composition and chemical analysis results, it shows the best condition for extraction using HD method is at 2100 W power, the F/S ratio is 0.025, and the material size is 1 cm.

AB - Ocimum basilicum essential oil has many uses; however, it is still difficult to get the maximum results, in terms of both quantity and quality due to some reason. Thus, it is necessary to study the factors affecting the extraction in order to give the maximum output in terms of yield and quality. The method in this study was the most commonly used one, which is called hydrodistillation (HD) method. The highest yield in this study goes as high as 1.4%, which was obtained when 1 cm-sized of material, 2100 Watt of power, and solvent to material ratio of 0.025 was operated. With regards to the resulting composition and chemical analysis results, it shows the best condition for extraction using HD method is at 2100 W power, the F/S ratio is 0.025, and the material size is 1 cm.

KW - Extraction yield

KW - Hydrodisltillation

KW - Ocimum basilicum

UR - http://www.scopus.com/inward/record.url?scp=85085185811&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85085185811

SN - 9783035716139

T3 - Key Engineering Materials

SP - 199

EP - 204

BT - Symposium of Materials Science and Chemistry II

A2 - Wahyuningsih, Tutik Dwi

A2 - Roto, Roto

A2 - Siswanta, Dwi

A2 - Adnan, Rohana

A2 - Commeiras, Laurent

A2 - Triyana, Kuwat

A2 - Kartini, Indriana

A2 - Motuzas, Julius

PB - Trans Tech Publications Ltd

T2 - 5th International Conference on Science and Technology, ICST 2019

Y2 - 30 July 2019 through 31 July 2019

ER -

Qadariyah L , Mahfud M, Muchammad RSC, Junianto BR, Prasetya DW, Bhuana DS. Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method. In Wahyuningsih TD, Roto R, Siswanta D, Adnan R, Commeiras L, Triyana K, Triyana K, Kartini I, Motuzas J, editors, Symposium of Materials Science and Chemistry II. Trans Tech Publications Ltd. 2020. p. 199-204. (Key Engineering Materials).

Study on factors affecting the extraction of ocimum basilicum using hydrodistillation method

Abstract

Publication series

Conference

Keywords

Other files and links

Fingerprint

Cite this