The effect of Al2O3-SiO2 mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application

W. W. Kukuh; M. A. Putrawan; T. W. Alvian; S. Ridwan

doi:10.1063/1.4820997

The effect of Al₂O₃-SiO₂ mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application

Widyastuti, W. W. Kukuh, M. A. Putrawan, T. W. Alvian, S. Ridwan

Institut Teknologi Sepuluh Nopember

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al₂O₃-SiO₂. The mixing ratio of ceramic oxide were 80% Al₂O₃-20% SiO₂; 70% Al₂O₃-30% SiO₂, and 60% Al₂O₃-40% SiO₂. Coating process is conduct by Flame Spray. The microstructure, phase and adhesion strength of TBC examined by Scanning Electron Microscope(SEM), X-Ray Diffraction and pull off test. The results shown that mullite formed at mixing ratio 70% Al₂O ₃-30% SiO₂. The reduction of TBC thickness was reduced to 40% of the initial thickness after heating. The adhesive strength decreases with increasing of SiO₂ composition.

Original language	English
Title of host publication	International Conference on Theoretical and Applied Physics, ICTAP 2012
Pages	75-79
Number of pages	5
DOIs	https://doi.org/10.1063/1.4820997
Publication status	Published - 2013
Event	2nd International Conference on Theoretical and Applied Physics, ICTAP 2012 - Palangkaraya, Central of Kalimantan, Indonesia Duration: 19 Oct 2012 → 20 Oct 2012

Publication series

Name	AIP Conference Proceedings
Volume	1555
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	2nd International Conference on Theoretical and Applied Physics, ICTAP 2012
Country/Territory	Indonesia
City	Palangkaraya, Central of Kalimantan
Period	19/10/12 → 20/10/12

Keywords

AlO-SiO
Flame Spray
Mullite
Nozzle
S45C steel
Thermal Barrier Coating (TBC)

Access to Document

10.1063/1.4820997

Cite this

Widyastuti, Kukuh, W. W., Putrawan, M. A., Alvian, T. W., & Ridwan, S. (2013). The effect of Al₂O₃-SiO₂ mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application. In International Conference on Theoretical and Applied Physics, ICTAP 2012 (pp. 75-79). (AIP Conference Proceedings; Vol. 1555). https://doi.org/10.1063/1.4820997

@inproceedings{4b911beb9fb042e88fae39670997b314,

title = "The effect of Al2O3-SiO2 mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application",

abstract = "Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al2O3-SiO2. The mixing ratio of ceramic oxide were 80% Al2O3-20% SiO2; 70% Al2O3-30% SiO2, and 60% Al2O3-40% SiO2. Coating process is conduct by Flame Spray. The microstructure, phase and adhesion strength of TBC examined by Scanning Electron Microscope(SEM), X-Ray Diffraction and pull off test. The results shown that mullite formed at mixing ratio 70% Al2O 3-30% SiO2. The reduction of TBC thickness was reduced to 40% of the initial thickness after heating. The adhesive strength decreases with increasing of SiO2 composition.",

keywords = "AlO-SiO, Flame Spray, Mullite, Nozzle, S45C steel, Thermal Barrier Coating (TBC)",

author = "Widyastuti and Kukuh, {W. W.} and Putrawan, {M. A.} and Alvian, {T. W.} and S. Ridwan",

year = "2013",

doi = "10.1063/1.4820997",

language = "English",

isbn = "9780735411814",

series = "AIP Conference Proceedings",

pages = "75--79",

booktitle = "International Conference on Theoretical and Applied Physics, ICTAP 2012",

note = "2nd International Conference on Theoretical and Applied Physics, ICTAP 2012 ; Conference date: 19-10-2012 Through 20-10-2012",

}

Widyastuti, Kukuh, WW, Putrawan, MA, Alvian, TW & Ridwan, S 2013, The effect of Al₂O₃-SiO₂ mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application. in International Conference on Theoretical and Applied Physics, ICTAP 2012. AIP Conference Proceedings, vol. 1555, pp. 75-79, 2nd International Conference on Theoretical and Applied Physics, ICTAP 2012, Palangkaraya, Central of Kalimantan, Indonesia, 19/10/12. https://doi.org/10.1063/1.4820997

The effect of Al₂O₃-SiO₂ mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application. / Widyastuti; Kukuh, W. W.; Putrawan, M. A. et al.
International Conference on Theoretical and Applied Physics, ICTAP 2012. 2013. p. 75-79 (AIP Conference Proceedings; Vol. 1555).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The effect of Al2O3-SiO2 mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application

AU - Widyastuti,

AU - Kukuh, W. W.

AU - Putrawan, M. A.

AU - Alvian, T. W.

AU - Ridwan, S.

PY - 2013

Y1 - 2013

N2 - Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al2O3-SiO2. The mixing ratio of ceramic oxide were 80% Al2O3-20% SiO2; 70% Al2O3-30% SiO2, and 60% Al2O3-40% SiO2. Coating process is conduct by Flame Spray. The microstructure, phase and adhesion strength of TBC examined by Scanning Electron Microscope(SEM), X-Ray Diffraction and pull off test. The results shown that mullite formed at mixing ratio 70% Al2O 3-30% SiO2. The reduction of TBC thickness was reduced to 40% of the initial thickness after heating. The adhesive strength decreases with increasing of SiO2 composition.

AB - Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al2O3-SiO2. The mixing ratio of ceramic oxide were 80% Al2O3-20% SiO2; 70% Al2O3-30% SiO2, and 60% Al2O3-40% SiO2. Coating process is conduct by Flame Spray. The microstructure, phase and adhesion strength of TBC examined by Scanning Electron Microscope(SEM), X-Ray Diffraction and pull off test. The results shown that mullite formed at mixing ratio 70% Al2O 3-30% SiO2. The reduction of TBC thickness was reduced to 40% of the initial thickness after heating. The adhesive strength decreases with increasing of SiO2 composition.

KW - AlO-SiO

KW - Flame Spray

KW - Mullite

KW - Nozzle

KW - S45C steel

KW - Thermal Barrier Coating (TBC)

UR - http://www.scopus.com/inward/record.url?scp=84885006391&partnerID=8YFLogxK

U2 - 10.1063/1.4820997

DO - 10.1063/1.4820997

M3 - Conference contribution

AN - SCOPUS:84885006391

SN - 9780735411814

T3 - AIP Conference Proceedings

SP - 75

EP - 79

BT - International Conference on Theoretical and Applied Physics, ICTAP 2012

T2 - 2nd International Conference on Theoretical and Applied Physics, ICTAP 2012

Y2 - 19 October 2012 through 20 October 2012

ER -