Voltage stability in DC micro grid by controlling two battery units with hybrid network systems

Adhi Kusmantoro; Ardyono Priyadi; Mauridhi Hery Purnomo

doi:10.1109/IEA.2018.8387089

Voltage stability in DC micro grid by controlling two battery units with hybrid network systems

Institut Teknologi Sepuluh Nopember
Universitas PGRI Semarang

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

Abstract

In DC network systems micro grid battery storage units are used to assist the main source of renewable energy (PV array) in providing stable voltage on the DC bus. Micro grid storage systems play an important role in providing services on demand. The lithium-ion batteries are used in this design, because these batteries have high energy density. In the micro-grid design is used three units of PV arrays and each unit consists of two PV arrays and two batteries. Battery units are used for storage of PV array sources and single phase gird AC. The PV array unit provides 22.8 V output voltage and the battery unit provides 22.78 V output voltage. Boost converter increases the voltage of the PV array and battery unit to a DC bus of 48 V. The PID controller is effectively used boost converter in raising or lowering the voltage. The advantage of using two battery storage systems is that if one unit is not sufficient to provide a voltage to the DC bus, then the battery unit on the AC grid side will also rapidly provide a voltage to the DC bus.

Original language	English
Title of host publication	2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	163-168
Number of pages	6
ISBN (Electronic)	9781538657478
DOIs	https://doi.org/10.1109/IEA.2018.8387089
Publication status	Published - 15 Jun 2018
Event	5th International Conference on Industrial Engineering and Applications, ICIEA 2018 - Singapore, Singapore Duration: 26 Apr 2018 → 28 Apr 2018

Publication series

Name	2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018

Conference

Conference	5th International Conference on Industrial Engineering and Applications, ICIEA 2018
Country/Territory	Singapore
City	Singapore
Period	26/04/18 → 28/04/18

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

DC-DC converters
Hybrid systems
power electronic converter

Access to Document

10.1109/IEA.2018.8387089

Cite this

Kusmantoro, A., Priyadi, A., & Purnomo, M. H. (2018). Voltage stability in DC micro grid by controlling two battery units with hybrid network systems. In 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018 (pp. 163-168). (2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IEA.2018.8387089

Kusmantoro, Adhi ; Priyadi, Ardyono ; Purnomo, Mauridhi Hery. / Voltage stability in DC micro grid by controlling two battery units with hybrid network systems. 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc., 2018. pp. 163-168 (2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018).

@inproceedings{1adb8f22f66448dc84a5dd96d9c6dbf9,

title = "Voltage stability in DC micro grid by controlling two battery units with hybrid network systems",

abstract = "In DC network systems micro grid battery storage units are used to assist the main source of renewable energy (PV array) in providing stable voltage on the DC bus. Micro grid storage systems play an important role in providing services on demand. The lithium-ion batteries are used in this design, because these batteries have high energy density. In the micro-grid design is used three units of PV arrays and each unit consists of two PV arrays and two batteries. Battery units are used for storage of PV array sources and single phase gird AC. The PV array unit provides 22.8 V output voltage and the battery unit provides 22.78 V output voltage. Boost converter increases the voltage of the PV array and battery unit to a DC bus of 48 V. The PID controller is effectively used boost converter in raising or lowering the voltage. The advantage of using two battery storage systems is that if one unit is not sufficient to provide a voltage to the DC bus, then the battery unit on the AC grid side will also rapidly provide a voltage to the DC bus.",

keywords = "DC-DC converters, Hybrid systems, power electronic converter",

author = "Adhi Kusmantoro and Ardyono Priyadi and Purnomo, \{Mauridhi Hery\}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 5th International Conference on Industrial Engineering and Applications, ICIEA 2018 ; Conference date: 26-04-2018 Through 28-04-2018",

year = "2018",

month = jun,

day = "15",

doi = "10.1109/IEA.2018.8387089",

language = "English",

series = "2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "163--168",

booktitle = "2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018",

address = "United States",

}

Kusmantoro, A, Priyadi, A & Purnomo, MH 2018, Voltage stability in DC micro grid by controlling two battery units with hybrid network systems. in 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018. 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018, Institute of Electrical and Electronics Engineers Inc., pp. 163-168, 5th International Conference on Industrial Engineering and Applications, ICIEA 2018, Singapore, Singapore, 26/04/18. https://doi.org/10.1109/IEA.2018.8387089

Voltage stability in DC micro grid by controlling two battery units with hybrid network systems. / Kusmantoro, Adhi; Priyadi, Ardyono ; Purnomo, Mauridhi Hery.
2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc., 2018. p. 163-168 (2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Voltage stability in DC micro grid by controlling two battery units with hybrid network systems

AU - Kusmantoro, Adhi

AU - Priyadi, Ardyono

AU - Purnomo, Mauridhi Hery

PY - 2018/6/15

Y1 - 2018/6/15

N2 - In DC network systems micro grid battery storage units are used to assist the main source of renewable energy (PV array) in providing stable voltage on the DC bus. Micro grid storage systems play an important role in providing services on demand. The lithium-ion batteries are used in this design, because these batteries have high energy density. In the micro-grid design is used three units of PV arrays and each unit consists of two PV arrays and two batteries. Battery units are used for storage of PV array sources and single phase gird AC. The PV array unit provides 22.8 V output voltage and the battery unit provides 22.78 V output voltage. Boost converter increases the voltage of the PV array and battery unit to a DC bus of 48 V. The PID controller is effectively used boost converter in raising or lowering the voltage. The advantage of using two battery storage systems is that if one unit is not sufficient to provide a voltage to the DC bus, then the battery unit on the AC grid side will also rapidly provide a voltage to the DC bus.

AB - In DC network systems micro grid battery storage units are used to assist the main source of renewable energy (PV array) in providing stable voltage on the DC bus. Micro grid storage systems play an important role in providing services on demand. The lithium-ion batteries are used in this design, because these batteries have high energy density. In the micro-grid design is used three units of PV arrays and each unit consists of two PV arrays and two batteries. Battery units are used for storage of PV array sources and single phase gird AC. The PV array unit provides 22.8 V output voltage and the battery unit provides 22.78 V output voltage. Boost converter increases the voltage of the PV array and battery unit to a DC bus of 48 V. The PID controller is effectively used boost converter in raising or lowering the voltage. The advantage of using two battery storage systems is that if one unit is not sufficient to provide a voltage to the DC bus, then the battery unit on the AC grid side will also rapidly provide a voltage to the DC bus.

KW - DC-DC converters

KW - Hybrid systems

KW - power electronic converter

UR - https://www.scopus.com/pages/publications/85050125367

U2 - 10.1109/IEA.2018.8387089

DO - 10.1109/IEA.2018.8387089

M3 - Conference contribution

AN - SCOPUS:85050125367

T3 - 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018

SP - 163

EP - 168

BT - 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th International Conference on Industrial Engineering and Applications, ICIEA 2018

Y2 - 26 April 2018 through 28 April 2018

ER -

Kusmantoro A, Priyadi A , Purnomo MH. Voltage stability in DC micro grid by controlling two battery units with hybrid network systems. In 2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018. Institute of Electrical and Electronics Engineers Inc. 2018. p. 163-168. (2018 5th International Conference on Industrial Engineering and Applications, ICIEA 2018). doi: 10.1109/IEA.2018.8387089

Voltage stability in DC micro grid by controlling two battery units with hybrid network systems

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this